Gravity Bottle Fillers (Non-Spring)


Our 12" Gravity Bottle Filler comes with a sensitive tip to top up the bottle until the desired level is reached. To use the bottle filler, just press the tip against the bottle. To stop, just lift it.

The bottle filler has a small O-Ring for better seal, making it leak-proof.

Gravity bottle fillers are not easy to clean.

This product is not resistant to high levels of alcohol. Do not sanitize with alcohol.

Acrylic is safe for long exposure to ABV (alcohol by Volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed this limits, please use a different product, contact your retailer (or us) and we can guide you to different options.


  • BPA Free

They come in two sizes:
  • 1/2”fits well with a 7/16" x 9/16" siphon hose
  • 3/8”fits well with a 5/16" x 7/16” siphon hose

Maximum Temperature: 60 °C (140 °F).


For videos on how to use it with Spigots and Easy Siphons refer to the videos.

Works the same as the Spring Bottle Filler!


FAQ

Q. The Gravity Bottle Filler tip drips from time to time?

A. Give the tip a tug, so the inner gasket will accommodate properly


Note: we do not sell our products directly.

If your local retailer does not carry our products, feel free to e-mail us so we can direct you to the nearest retailer.
If you are a retailer, please let your preferred wholesaler know about your needs.

Some of our products may contain harmful substances according to the state of California. For more information please contact us for each specific product.